d a t a sh eet supersedes data of february 2002 2004 sep 01 e30/15/7 e cores and accessories
2004 sep 01369 ferroxcube e cores and accessoriese30/15/7 core sets effective core parameters symbolparametervalueunit (i/a)core factor (c1)1.12mm 1 v e effective volume4000mm 3 i e effective length67.0mm a e effective area60.0mm 2 a min minimum area49.0mm 2 mmass of core half 11g r1 r 0.5 15 0.2 19.5 1.0 0 7.2 0 0.5 30.8 0 1.4 9.7 0.5 0 7.3 0 0.5 fig.1 e30/15/7 core half. dimensions in mm. core halves a l measured in combination with a non-gapped core half, clamping force for a l measurements 20 10n, unless stated otherwise. grade a l (nh) e air gap ( m) type number 3c81100 5% (1) 89 1100e30/15/7-3c81-e100 160 5% 142 580e30/15/7-3c81-a160 250 5% 222 330e30/15/7-3c81-a250 315 5% 280 240e30/15/7-3c81-a315 400 8% 355 180e30/15/7-3c81-a400 630 5% 560 100e30/15/7-3c81-a630 2500 25% 2220 0e30/15/7-3c81 3c90100 5% (1) 89 1100e30/15/7-3c90-e100 160 5% 142 580e30/15/7-3c90-a160 250 5% 222 330e30/15/7-3c90-a250 315 5% 280 240e30/15/7-3c90-a315 400 8% 355 180e30/15/7-3c90-a400 630 5% 560 100e30/15/7-3c90-a630 1900 25% 1690 0e30/15/7-3c90 3c912500 25% 2220 0e30/15/7-3c91 3c921400 25% 1250 0e30/15/7-3c92 3c941900 25% 1690 0e30/15/7-3c94 3c961600 25% 1420 0e30/15/7-3c96
2004 sep 01370 ferroxcube e cores and accessoriese30/15/7 note 1.measured in combination with an equal gapped core half, clamping force for a l measurements, 20 10n. core halves of high permeability grades clamping force for a l measurements 20 10n. 3f3100 5% (1) 89 1100e30/15/7-3f3-e100 160 5% 142 580e30/15/7-3f3-a160 250 5% 222 330e30/15/7-3f3-a250 315 5% 280 240e30/15/7-3f3-a315 400 8% 355 180e30/15/7-3f3-a400 630 5% 560 100e30/15/7-3f3-a630 1600 25% 1420 0e30/15/7-3f3 3f351250 25% 1110 0e30/15/7-3f35 grade a l (nh) e air gap ( m) type number 3c113300 25% 2930 0e30/15/7-3c11 3e274100 25% 3640 0e30/15/7-3e27 grade a l (nh) e air gap ( m) type number
2004 sep 01371 ferroxcube e cores and accessoriese30/15/7 properties of core sets under power conditions properties of core sets under power conditions (continued) note 1.measured at 60 c. grade b (mt) atcore loss (w) at h=250a/m; f=25khz; t=100 c f=25khz; =200mt; t=100 c f=100khz; =100mt; t=100 c f=100khz; =200mt; t=100 c f=400khz; =50mt; t=100 c 3c81 320 0.82 3c90 330 0.45 0.48 3c91 320 0.27 (1) 1.6 (1) 3c92 370 0.36 2.0 3c94 330 0.36 2.0 3c96 340 0.27 1.6 3f3 320 0.47 0.80 3f35 300 grade b (mt) atcore loss (w) at h=250a/m; f=25khz; t=100 c f=500khz; =50mt; t=100 c f=500khz; =100mt; t=100 c f=1mhz; =30mt; t=100 c f=3mhz; =10mt; t=100 c 3c81 320 3c90 330 3c91 320 3c92 370 3c94 330 3c96 340 1.5 3f3 320 3f35 300 0.54 4.2 b ? b ? b ? b ? b ? b ? b ? b ?
2004 sep 01372 ferroxcube e cores and accessoriese30/15/7 coil formers general data for e30/15/7 coil former without pins winding data for e30/15/7 coil former without pins (e) parameterspecification coil former materialpolyamide (pa6.6), glass reinforced, flame retardant in accordance with ; ul file number e41613(m) maximum operating temperature120 c number of sections winding area (mm 2 ) minimum winding width (mm) average length of turn (mm) type number 18017.056cp-e30/15/7-1s 20.1 max. 19.1 max. 19 17 min. 7.5 0.1 0 9 0 0.2 fig.2 e30/15/7 coil former. dimensions in mm.
2004 sep 01373 ferroxcube e cores and accessoriese30/15/7 general data for 10-pins e30/15/7 coil former winding data for 10-pins e30/15/7 coil former (e) parameterspecification coil former materialphenolformaldehyde (pf), glass reinforced, flame retardant in accordance with ; ul file number e167521(m) pin materialcopper-tin alloy (cusn), tin-lead alloy (snpb) plated, transition to lead-free (sn) ongoing. maximum operating temperature180 c, class h resistance to soldering heat , part2, testtb, method1b: 350 c, 3.5s solderability , part2, testta, method1: 235 c, 2s number of nections winding area (mm 2 ) minimum winding width (mm) average length of turn (mm) type number 18017.156csh-e30/7-1s-10p 5.08 24.1 max. 3 (17.1 min.) 19 max. 0.8 0.02 29.1 max. 7.5 0.2 0 1.3 0.15 0 2 0.1 0 7.5 0.2 0 9.3 0 0.2 9.3 0 0.2 19 0 0.3 19 0 0.3 0.8 0 0.1 fig.3 e30/15/7 coil former; 10-pins. dimensions in mm.
2004 sep 01374 ferroxcube e cores and accessoriese30/15/7 mounting parts general data and ordering information itemremarksfiguretype number claspcuzn alloy, ni plated4cla-e30/15/7 springstainless steel (crni)5spr-e30/15/7 24 0.4 (2 ) 31.1 max. 10.5 2.5 0.8 2 7.6 min. 3.9 2.9 32 0.5 0.65 28 5 fig.4 e30/15/7 clasp. dimensions in mm. fig.5 e30/15/7 spring. dimensions in mm. 32.2 0.2 12.8 2.2 0.6 8.8 0.1 0.9 7.5 0 0.1 3.3 0 0.15
2004 sep 01375 ferroxcube e cores and accessoriese30/15/7 data sheet status definitions disclaimer life support applications these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify ferroxcube for any damages resulting from such application. product status definitions data sheet status product status definitions preliminary specification developmentthis data sheet contains preliminary data. ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. product specificationproductionthis data sheet contains final specifications. ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. statusindicationdefinition prototype these are products that have been made as development samples for the purposes of technical evaluation only. the data for these types is provisional and is subject to change. design-in these products are recommended for new designs. preferred these products are recommended for use in current designs and are available via our sales channels. support these products are not recommended for new designs and may not be available through all of our sales channels. customers are advised to check for availability.
|
